ColorNews Issue #56

Troubleshooting Color

  CHROMiX ColorNews
   Issue # 56 - October 15th, 2014

This Month's Contents

  1. CHROMiX News
  2. Latest blog entries in ColoRants (and Raves)
  3. Shows and Events
  4. Color Industry News
  5. Forum Topics, Random Bits, etc.
  6. Article - Troubleshooting Color - Part Two (Printers)
  7. CHROMiX Open Box items for sale
  8. ColorNews Admin (feedback, subscriptions, etc.)

For the very freshest color updates, check out our new blog Colorants (and raves).

Respond & Discuss
Don't forget, you can discuss this month's article and anything else from this newsletter in

Find full details about subscriptions, etc at the end of this newsletter.

CHROMiX News What the heck have we been up to?

CHROMiX becomes a Barbieri Partner

CHROMiX has become a direct Barbieri Partner recently, and Barbieri North America will soon be launching the 'Barbieri Technology Center' concept. The enabled partner will offer and demonstrate to customers their unique value-added software and/or service solutions combined with Barbieri products. To that end, CHROMiX will soon release Maxwell Client v5 software and will be able to drive the LFP and SpectroPad2 directly for Maxwell data acquisition. We are excited to be working with Barbieri closely and look forward to bringing compelling solutions forward to our customers.

CHROMiX on NEC Google+ hangout panel

Our own Rick Hatmaker was a panelist on an NEC sponsored LIVE Google+ hangout on Tuesday October 14th at 2:00 pm Central. He was joined by other panelists for the discussion topic 'Getting Started with Color Management'. Art Marshall, NEC Professional and Medical Displays Product Manager, was the host and moderator.

There is a 1 hour YouTube video recording available here of the entire discussion.

CHROMiX Sightings

GraphExpo 2014 - Chicago - September 28th to October 1st. Steve Upton and Rick Hatmaker walked the show floor and had several meetings with key customers and partners. Overall, the 2014 GraphExpo was good, slightly smaller, but still with good energy. The highlight (show-wise) for us was the G7 Summit. It had double the size of attendees as last year and was held in a private meeting hall (much better). Topics were focused and informative. A plethora of who's who in G7, including Don Hutcheson, were available to attendees.

SGIA 2014 - Las Vegas - October 22nd to 24th. Steve Upton and Rick Hatmaker will be walking the show floor and engaged in meetings with key partners and customers. CHROMiX is also a sponsor of the Color Management Group vendor booth (# 4570) and will have product and banner presence at the booth for Curve3, ColorThink and Maxwell. Ask us about the Maxwell Certification program if you are a consultant partner. If you're a customer or partner at the show and would like to chat or say hello, drop a quick email to Rick (at) and we'll set something up.

Color Management Conference 2014 (CMC) - Scottsdale - December 6th to 9th and presented by Printing Industries of America. The CMC is always a favorite stop for CHROMiX. It ends the year of color with some very good focus. Steve Upton, Pat Herold and Rick Hatmaker will be at this years CMC. CHROMiX will be a Vendor Sponsor and have a vendor booth represented. Both Steve and Pat are presenting sessions as well. Steve is presenting 'Visualizing Color Graphically' on Monday 12/8 at 11:40 am, plus 'Best Practices in Dealing with Instrumentation Differences' on Monday 12/8 at 1:40 pm. Pat is presenting 'Color Management Myths (and How to Bust Them!)' on Sunday 12/7 at 11:40 am, plus 'How to Create and Verify Profiles' on Monday 12/8 at 2:50 pm. Please come by and see us at any time!

Maxwell Client v5

Maxwell Client v5 is being released in the coming few weeks. One of the most important upgrades in a while for Maxwell users, version 5 Client incorporates the new ISO M-series designations for measuring. Version 5 will be completely compatible with the i1Pro2 (and its capabilities), but also including compatibility with M0, M1, M2 and M3 measurements. Maxwell Client v5 will also introduce the first compatibilities with the Barbieri LFP and SpectroPad2 devices with a subsequent release.

Maxwell customers can acquire the latest version 5 by requesting it from CHROMiX. Some minimal setup is likely required so CHROMIX will help customers adapt.

Maxwell Customer Quote

"We absolutely could not do without Maxwell. I have no other way to manage 17 digital presses on 3 different platforms and have them match. We can also match color globally using Maxwell's scientific approach. This could not be done using traditional methods." Henry Anderson, Technology and Color Specialist, CDS Publications, A Consolidated Graphics Company


CHROMiX Blog Here are some of the recent posts to our blog: Colorants (and raves)

Shows and Events Color-relevant gatherings to plan for

October 20th - 22nd, 2014 - FTA Fall Conference and Tabletop Exhibit - Doubletree HIlton, Minneapolis, MN. Mike Ferrari, Founder/President, Ferrari Innovation Solutions will be speaking, plus many other influential and inspirational speakers at this popular flexographic trade meeting.

October 22nd - 24th, 2014 - SGIA Expo 2014 in Las Vegas at the Las Vegas Convention Center. This one is all about Specialty Graphics, Wide/Grand Format.. and more. CHROMiX will have product presence at booth # 4570 for Curve3, ColorThink Pro and Maxwell. Steve Upton and Rick Hatmaker will also be on the show floor, so if you'd like to meet, drop Rick a line at Rick (at)

October 29th - November 1st, 2014 - PDN PhotoPLUS International Expo and Conference 2014 - Javits Center, New York City, NY. Most everything photography for pro's and amateurs.

November 3rd, 2014 - DevCon 2014 - ICC Developers Conference titled 'iccMAX' @ the Joseph B Martin Conference Center at Harvard Medical School, Boston, MA.

November 18th - 21st, 2014 - Gravure Publishing and Premedia Conference at the Naples Beach Hotel and Golf Club, Naples, FL.

December 6th - 9th, 2014 - The 2014 Color Management Conference (CMC) presented by the Printing Industries of America, the CMC will be at the Hilton Scottsdale Resort and Villas, Scottsdale, AZ and is always a favorite stop for CHROMiX to end the year colorfully. Please come on by our booth and say hello to Rick, or attend one of Steve's or Pat's sessions. We'll look forward to seeing you there!

Events Calendar: For all current and future events, bookmark this calendar.

Color Industry News What's going on in the world of color

AOC to protect against blue light in monitors

Fascinating, is all we came up with for this one.... well, that and really?

EnChroma intros color blindness correction eyewear

These nifty glasses are a little pricey, but it could help someone with color blindness deficiency. Maybe someone who's color blind from the field can let us know if they work, or not. There's a color blindness test on the EnChroma website to help indicate a possible color blindness problem.

Barbieri announces Technology Centers and QBQC Tech program

At SGIA 2014 in Las Vegas, Barbieri Electronics will announce and launch a new Technology Centers concept and a QBQC Tech program to illustrate new initiatives with OEM's and Partners. This initiative will benefit customers directly in North America by providing better access to information, solutions and Barbieri product. Note: CHROMiX is a new Barbieri Partner and is aligned well with this initiative. CHROMiX will be providing direct device connectivity soon for the LFP and SpectroPad2 with Maxwell via Maxwell Client v5.

Barbieri will be showing the LFP and SpectroPad2 extensively at their booth # 3171 at SGIA. CHROMiX probably won't be too far from there if you need to talk about any solution.

X-Rite updates i1Profiler to v1.5.6

X-Rite released a new version of i1Profiler this last Summer that fixed a bug in the i1Pro SDK that caused slightly false measurement errors when calculating M1 (D50) and M2 (UVCut) spectral values. It is important to note that this issue did not affect M0 (tungsten only) measurements. Version 1.5.6 also addressed the latest OS and other compatibilities and issues.

X-Rite product discontinuances

Many X-Rite products end: PlateScope, ICPLate2, 369, 369X, EasyTrax 20", 26" and 32" models, 890U, 890UX, 891U, D19C Cards, SP52, SP60, SP61, SP62, SP64, CGS57, ColorEye XTH, IQC Basic, 552 and PD+. For the full list, use this link: discontinued X-Rite products.

Forum Topics and other bits  Popular topics from and other things we've found along the way.

Color Mananagement Blog based in the UK:   CHROMiX has been keeping a eye on this blog based in the UK. It's quite good. It frequently has up-to-date, accurate and useful information relating to products and mainstream topics. We encourage you to check it out.

ColorPort Users Manual:   Many people use X-Rite's free ColorPort software for measurement data manipulation, but have no idea there is a Users Manual. In case you missed it, here it is.

Troubleshooting Color - Part Two (Printers) By Pat Herold

In our last newsletter we looked at how to track down the source of color problems on displays. We also looked at some good general advice for what to do now, that can aid you down the road when color problems happen. Some of that advice is good for print problems too, so you can review those tips from last time here.


A profile will last forever if the conditions that existed when it was created continue with no change. If your printing workflow is producing a different color, consider that one of the following has changed:

The media

Different papers will absorb ink differently. A high quality matte art paper may look identical to another matte paper, but the way the coating on the paper absorbs the ink can be completely different. Unless you have established that two different papers will print identically, you should plan on a different profile for each paper type.

The ink

The first place to check when you see color problems in an inkjet printer is to print a nozzle check pattern to make sure there are no clogged ink heads. Keep in mind that it is essential that your profiling target was printed correctly too. If it had clogged ink nozzles when printing the target and you did not know about it, no software is going to make a good profile out of that target. You would need to start all over again with a new target to be sure. Has there been any recent change in the ink lately? Check to see if the wrong cartridge is in place (like a light cyan cartridge in the location for a regular cyan). Ink that has been sitting on a shelf (or sitting in your printer) for six months or more may have pigments settling unevenly. Check the expiration dates on the ink. Once in awhile we hear about a bad batch of ink. The color snapped back into place after replacing the old cartridge with a new one, and purging the old ink through the system.

The settings

Last time we discussed the need to document your settings. Make sure you're using the right configuration or environment settings for your RIP. Usually a different resolution or a different setting between high speed/ low speed does not make a big difference in color, but it can make a small difference.

If you are printing through a printer driver, you really want to save a preset for each paper type you print onto. For example, use the "luster-1440" preset you saved every time you print with that paper. It is essential for color consistency that you use the same settings every time.

Are you using the right rendering intent for what you need? Different rendering intents will give a more subtle change in color. For example, the perceptual rendering intent will tend you give you less saturation overall, while the relative colorimetric intent will give you more saturated colors. More on rendering intents is here.

Check to see that you are not applying a printer profile in more than one place. This is a common problem for RGB workflows printed through printer drivers. It is possible to have a profile in place in Photoshop for example, and then also to have the operating system use another profile deep in the bowels of the driver settings. A printer profile must be used in one place or the other, not both.

Has the printer driver version changed? Any time we upgrade to a new version of the driver, there is a possibility that the algorithms behind the media settings have changed. This is true for operating system updates as well if they involve printer drivers. Most of the time your color will stay the same. But if you upgrade to a new driver and your color changes, even though you're using the same media settings, then that is probably the cause. It is time to get a new profile or revert back to the old driver.

The hardware

This is a long shot, but sometimes a print head will gradually change the way it prints over time. If you have already verified that your media, ink and settings have not changed - sometimes the only thing left to do is to create a new profile and chalk it up to some mysterious hardware glitch. It drives some people nuts to not know why the color went bad, but if you have to get the work out, then you do what you have to do. Making a new profile will at least fix the color. You will be wise to keep a close eye on things to see if the color changes again though. One unexplained change in color can easily lead to another unexplained change, and you can end up chasing your tail as it were.

If you are working with a traditional or digital press, you have another set of variables to deal with in print variation. It could be beginning of run vs. end of run, cross-sheet variation or a host of hardware-related issues that will affect the consistency of color on the sheet. It's beyond the scope of this article to walk you through troubleshooting a press, but I will say that it pays to keep this variability in mind. Don't make decisions based on one or two samples. It's wise to get an average. Smoothing measurement data will do a lot to curb some of the extreme outlier measurements that don't truly represent the normal functioning of the press. For example, our Curve3 software has a very good smoothing algorithm that can be called into service to smooth any measurement data. A good press profile will average the measurements from several samples throughout the run. Our Digital PressWatch service in Maxwell helps to visually see where cross-sheet variation is happening.

There are some cases where a single image was used to verify the testing of a profile, so the entire capability of the profile/device was never tested. A similar thing can occur when, for example, a CMYK profile is successfully used for proofing, and months later when the profile is used for separations, a problem shows up. In both of these cases the flaw was always present in the profile, and incomplete testing lead the user to believe it was a good profile when in fact it was not.

It's always good to consider that maybe your original color was wrong to begin with - and your color now, while "different," is correct. Maybe you have been running all these years with a generic profile, and now that you have just started making custom profiles, you suspect the color is bad because it is different from what you have gotten used to? Perhaps your original profiling target had some print defect, or something went wrong with the profile building years ago when it was originally done? You may never find out what happened, but if things are looking good now, then go with it.

Diagnostic software

Is your measurement instrument reliable?
X-Rite makes available a program called i1Diagnostics that will walk an X-Rite instrument through its paces and give a verdict on whether it is good or bad. At the conclusion of this process, you get a rudimentary result as to whether your instrument passed the tests or not. It is sometimes quite useful, but be cautious about putting too much weight on the results. It is especially good to run this test and save the results so that you have something to compare the numbers to if your device actually does go bad someday.

Control Tools

You can get a genuine, quantified judgment on the quality of your measurement device if you compare its measurements to a control tool that was measured at the factory. These come in the form of small control strips that are specially made of long-lasting material and have been pre-measured with a high quality spectrodensitometer. You can compare how your measurement compares to the factory measurement of the exact same strip of colored patches.

Maxwell has a service called MeasureWatch where a control tool is bundled with our Maxwell tracking services to provide an easy way to track the accuracy of a measurement device over time. It is one more way to eliminate another variable when trying to track down the cause of a color problem.

Environmental factors

Remember the auto-white balancing feature in our eyes? Lighting conditions can affect how you perceive color, so be aware of your ambient lighting. Unless you have great confidence in your viewing booth, take the print outside and view it in natural daylight on occasions. Printers are profiled so their prints look proper in true daylight. There is a problem called metamerism which is related to this and can be caused by the inks used, or by lighting. Here is an article on Metamerism.

Surrounding colors

Even the color of the walls in your room will affect how you perceive color in a display or a print that you are viewing. That beautiful western view out your studio provides great inspiration for your design work, but as the sun sets and the room is bathed in a golden glow, the prints off your printer will look more warm, and the images on your display will look increasingly colder by comparison. A neutral visual environment that does not change is preferred. People in the know actually buy paint that is specifically formulated to be perfectly neutral gray.

Image background

If your printed image has a white border around it, it will appear significantly darker than if it is cut out of the surrounding white or if it has a black border. The same thing is true for an image on a display. An image with a white background on screen will look a lot darker. When you switched to that newer version of Photoshop or Lightroom with a dark surround, did you notice your images all looked a little lighter? This white border business makes a big difference, and if you have never actually experienced this perception change, you should take a few moments to try this for yourself.

I spent a little time at the end here to present some perceptual problems with color. When something does not look right, it might not always be about hardware or software. The way our brains interpret the signals they get from our eyes can have a bigger effect than most people realize, so it's good to keep in mind the possibility of an optical illusion of some kind as you track down that elusive cause of your color problem.

Thanks for reading,

Patrick Herold
CHROMiX Tech Support

   To read this article with images in ColorWiki, click here

ColorNews Administration (feedback, subscriptions, etc.)

FEEDBACK and FAQs - ColorNews (this publication) has its own forum on Each issue of this newsletter tends to prompt responses from our readers and we often don't have enough time to respond to everyone (sorry!). So we created a discussion area on so anyone can ask questions, make suggestions, take issue with our prognostications or whatever. Come on by and have a chat!

SUBSCRIPTIONS - To unsubscribe from CHROMiX ColorNews, reply to this message with "unsubscribe" in the subject title. To subscribe, simply reply with "subscribe" in the subject title.

For previous ColorNews articles head to our ColorNews Archives

Entire Contents of CHROMiX ColorNews (c)2014 CHROMiX, Inc. CHROMiX, Maxwell, ColorThink, ColorNews, ColorSmarts, ColorGear, ColorForums, DisplayWatch and are trademarks of CHROMiX Inc. All other trademarks are property of their respective owners. CHROMiX ColorNews is intended as an informative update to CHROMiX customers and business associates. We are not responsible for errors or omissions. You may not copy or reuse any content from this newsletter without written permission from CHROMiX, Inc.